600T Girder Erection Machinery Full Span Beam Launcher Equipment

Product Description

600T Girder Erection Machinery Full Span Beam Launcher Equipment merges an adaptation of a wide range of work, excellent performance, convenient operation, safety structure into a single whole. It has the steel structure of rail type precast beam hoisting rack equipment. This product can be used not only in plain construction, but also to meet the construction of mountain highway slope, small radius curved bridge, skew bridge and tunnel bridge requirements.

Hydraulic System Operation

• The two ball-type globe valves on the same hydraulic cylinder must be closed or opened at the same time. Never open only one of the periods and close the other, otherwise it will cause an accident or even cause the hose to burst or the hydraulic cylinder to be damaged;
• Determine the setting value of the relief valve according to the different working conditions of the middle and rear three outriggers and the lifting beam jack of the double beam crane operating the front and pressure systems, but the maximum value should not exceed 31MPa. After setting, use a nut to lock it. If it is too small, it will often overflow during work, causing the oil temperature to rise or even fail to work. If the setting pressure is too large, it will not provide safety and damage the components. The specific setting value is determined by the on-site technicians;
• When the oil temperature exceeds 70 ℃, the machine should be stopped for cooling. When the oil temperature is lower than 0 ℃, it should be considered to replace the low-temperature hydraulic oil;
• If any component or pipeline fails, the machine should be stopped immediately. The fluid of the bridge crane should be inspected and repaired by a trained professional technician. Operators must not dismantle it without authorization.

Notes On Operation

Before the electromechanical starting equipment of the Girder Erection Machinery Full Span Beam Launcher Equipment , the operator must carefully check the various parts that are fastened and lubricated, and make all the preparations before startup according to the operating regulations before starting to use. During the operation of the machine, the Girder Erection Machinery Full Span Beam Launcher Equipment should be monitored at all times. If abnormal conditions (such as severe vibrations, abnormal sounds, abnormal odors, leaks, temperature, pressure, etc.) are found during the operation of the various departments and the status of the instrument's indication signals, the Girder Erection Machinery Full Span Beam Launcher Equipment should be stopped and inspected; when the machine is not stopped, it should not touch the rotating parts and perform maintenance. When repairing and welding the steel structure of the working device, it is prohibited to use the machine body as a ground wire and provide protection during welding; electrical equipment must be repaired by a full-time electrician, and the power must be cut off before repairs, and a "prohibited closing" sign or send someone to guard the gate to prevent accidental power transmission; the power supply voltage must be the same as the rated voltage of the electrical equipment. All electrical equipment should be installed and qualified electric shock protectors on the line. The steel structure shall adopt protective zero connection and lightning and anti-induction devices; the oil used in the hydraulic system shall comply with the type and brand of hydraulic oil specified in the relevant instructions, keep the hydraulic oil clean, and the temperature of the hydraulic oil shall be maintained in the range of 30-80 degrees During use, control the oil temperature as much as possible, and do not exceed the allowable upper limit.

Parts Of Crane

Package & Delivery

Dowell Crane Co., Ltd is a China-leading company in crane manufacture and crane trading business. We serve a broad range of customers from all over the world, providing a complete set of advanced lifting projects, including Gantry crane, Bridge crane, Portal crane,
Beam launcher, Electric winch, Lifting platform and so on. Dowell crane is sticking to the global optimal procurement of raw materials and parts to make innovations in technical details of electric control and mechanical transmission,etc.We continue the wide and deep cooperation with the well-known transnational enterprises such as Simens and Sew in Germany, Schneider in France and ABB in Switzerland, etc.

Company Strength

Dowell Crane Co., Ltd is a China-leading group of crane businesses which was founded in 1955, Only one company has 60years manufacture experience. And serving a broad range of customers all over the world to provide a complete set of advanced lifting project, including Gantry crane, Bridge crane, Jib crane, Accessory. Our clients include manufacturing and process industries, shipyards, ports and so on. Regardless of your lifting needs, dowellcrane Machinery Group is committed to providing you with lifting equipment and services that increase the effectiveness and value of your business.

a). Dowell Crane Co., Ltd have already obtained the CCC,CE,BV,SGS,ISO OHSAS certification's and have won over 60 honors.

b). China's leading mechanical research and design institute and famous university provides advanced technical support for us.

c). Serviced for more than 5000 companies, and the products popular in more than 40 countries.

d). Through decades of unremitting efforts, now, Dowell Crane Co., Ltd covers an area of 180,000 square meters and over 380 sets of advanced equipments. Management staff reach to 860, and our worker have more than 10000.

Packing & Delivery terms:

1. Hoist and electric parts will be packed by plywood crate, for avoiding the demage from goods crash and impact during the delivery.

2. Girders and other main parts will be packed by plastic woven cloth, for preventing rust from soppy condition during the transportation.

3. Only the best transport solution will be taken for saving your cost uttermost on finance, security and time.